Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/11911
Nаziv: | The microstructure influence on the chip formation process of al-cu alloy cast conventionally and in semi solid state | Аutоri: | Kovač P. Sidjanin L. Rajnović, Dragan Savković, Borislav Wanasin J. |
Dаtum izdаvаnjа: | 1-јан-2012 | Čаsоpis: | Metalurgija | Sažetak: | For many metal alloys, the process of metal cutting is accompanied by extensive plastic deformation and fracture. To study this process, quick stop sectional samples of hypoeutectic Al-Cu alloy chip formation, either as conventionally cast alloy or as "semi solid metal" are used. The type of chip formation is classified according to crack formation mechanism and propagation. During cutting, in all specimens used, quasi-continuous chips with built-up edge (BUE) are obtained. The formation of BUE is undesirable since it is a highly deformed body with a semi stable top which periodically breaks away giving rise to poor workpiece surface quality. | URI: | https://open.uns.ac.rs/handle/123456789/11911 | ISSN: | 5435846 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
Prеglеd/i stаnicа
24
Prоtеklа nеdеljа
12
12
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.