Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/11691
Nаziv: | Heat transfer through a high temperature superconducting current lead at cryogenic temperatures | Аutоri: | Sekulic D. Edeskuty F. Uzelac, Zorica |
Dаtum izdаvаnjа: | 1-јан-1997 | Čаsоpis: | International Journal of Heat and Mass Transfer | Sažetak: | A study of heat transfer through a high temperature superconducting (HTSC) current lead in both, resistive and superconducting mode, has been performed. The set of dimensionless governing parameters was defined, and the physical meaning of different parameters elaborated. An optimal selection of thermal design parameters was suggested. The selection of parameters has been based on : (i) the numerical solution of a set of nonlinear governing differential equations ; and (ii) an estimation of the irreversibility induced by heat transfer and Joule heating phenomena. The results were discussed for a YBa2Cu3O7-δ (YBCO) compound system. The case study has been based on a cryogenic current lead model that includes the nonlinearities as follows : (i) variable thermal conductivity ; (ii) variable electrical resistivity (in resistive mode) ; and (iii) variable heat transfer coefficient. The results obtained correspond to the temperature range between 4.2 and 77 K. It was shown that a local variation in heat transfer coefficient does not influence the selection of optimal design parameters. © 1997 Elsevier Science Ltd. | URI: | https://open.uns.ac.rs/handle/123456789/11691 | ISSN: | 179310 | DOI: | 10.1016/S0017-9310(97)00013-6 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
1
prоvеrеnо 09.09.2023.
Prеglеd/i stаnicа
18
Prоtеklа nеdеljа
7
7
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.