Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/11083
Nаziv: | A novel approach to extending the linearity range of displacement inductive sensor | Аutоri: | Damnjanović, Mirjana Zivanov L. Nagy L. Djuric S. Biberdzic B. |
Dаtum izdаvаnjа: | 1-нов-2008 | Čаsоpis: | IEEE Transactions on Magnetics | Sažetak: | This paper presents a meander-type displacement inductive sensor, usable for the detection of small displacements (less than 0.5 mm) in the plane. It also describes design, realization, and the input inductance measurement of sensor. A displacement in two directions can be detected by using two sensor elements, each having a pair of meander coils. In each pair, one of the coils is fixed and between its terminals the input inductance was measured, while the other coil is short-circuited. If one coil is moved above the other, in directions of x-and z-axes, coupling between the coils will change, as well as the input inductance, which serves as a measure of displacement. In order to achieve better linearity of the sensor, longitudinal gaps are inserted in the middle of each conductive segment of one fixed coil. Four sets of inductive sensors were realized: without gap and with three different gaps. Planar, low-cost PCB technology was chosen for our prototype. In addition, an improved model of the inductive sensor is proposed. The input inductance of displacement sensor was calculated and compared with measured values. A good agreement was found. © 2008 IEEE. | URI: | https://open.uns.ac.rs/handle/123456789/11083 | ISSN: | 189464 | DOI: | 10.1109/TMAG.2008.2002801 |
Nаlаzi sе u kоlеkciјаmа: | FTN Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
28
prоvеrеnо 10.05.2024.
Prеglеd/i stаnicа
22
Prоtеklа nеdеljа
8
8
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.