Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/10591
Назив: | Metallographic study of non-homogenous armour impacted by armour-piercing incendiary ammunition | Аутори: | Baloš, Sebastian Sidjanin L. |
Датум издавања: | 1-авг-2011 | Часопис: | Materials and Design | Сажетак: | In this paper, the influence of impact and incendiary effect on the microstructure changes and crack development in non-homogenous add-on armour is studied. The main objective was to determine the parameters that may cause the yielding of the material, leading to a possible decrease in multi-hit resistance. For that purpose, patented wire fence and perforated plates made from two types of high strength steel, Hardox 450 and 50CrV4 tempered at 170 °C were tested. Various techniques were applied: high speed video camera was used, visual macroanalysis, light microscopy, scanning electron microscopy and energy dispersive X-ray analysis. It was found that incendiary effect, being of a brief nature, does not have any influence on microstructure of the add-on armour. However, impact greatly influences crack development and propagation, which occurs in 50CrV4 steel, the material with lower ductility, diminishing its multi-hit resistance. In accordance with obtained results, non-homogenous add-on armour behaviour models were devised, describing the influence of material ductility and geometry on fracture mode, stresses and deformability. © 2011 Elsevier Ltd. | URI: | https://open.uns.ac.rs/handle/123456789/10591 | ISSN: | 2641275 | DOI: | 10.1016/j.matdes.2011.02.060 |
Налази се у колекцијама: | FTN Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
7
проверено 20.05.2023.
Преглед/и станица
25
Протекла недеља
9
9
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.