Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/1054
Nаziv: | Selecting the size of the universal reducer, taking into account its thermal load capacity | Аutоri: | Rackov, Milan Kuzmanović, S. Anišić, Zoran |
Dаtum izdаvаnjа: | 1-дец-2018 | Čаsоpis: | Tehnicki Vjesnik | Sažetak: | © 2018, Strojarski Facultet. All rights reserved. Universal helical gear motors are among mechanisms that operate with a very high efficiency (about 0.98 per gear pair) [1, 2] and thus their thermal power capacity has not received enough attention, even in the cases when they overheat (usually at higher ambient temperature and high power motors). Therefore, it is necessary to define the thermal capacity in the catalogues of the speed reducer with a solid input shaft, as it is done by worm and helical-worm gear units which operate with much lower efficiency. Some manufacturers [3] pay necessary attention to this factor and thus enable the proper selection of gear reducers; this means they have prepared certain procedures to be undertaken if such occasion occurs, in order to overcome possible problems that may arise due to overheating the gear reducer. With this approach in the universal gear unit selection, some positive benefits can be surely achieved in the market of gear reducers, and that should not be ignored. | URI: | https://open.uns.ac.rs/handle/123456789/1054 | ISSN: | 13303651 | DOI: | 10.17559/TV-20170329230603 |
Nаlаzi sе u kоlеkciјаmа: | TF Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
Prеglеd/i stаnicа
37
Prоtеklа nеdеljа
14
14
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.