Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/1054
Title: | Selecting the size of the universal reducer, taking into account its thermal load capacity | Authors: | Rackov, Milan Kuzmanović, S. Anišić, Zoran |
Issue Date: | 1-Dec-2018 | Journal: | Tehnicki Vjesnik | Abstract: | © 2018, Strojarski Facultet. All rights reserved. Universal helical gear motors are among mechanisms that operate with a very high efficiency (about 0.98 per gear pair) [1, 2] and thus their thermal power capacity has not received enough attention, even in the cases when they overheat (usually at higher ambient temperature and high power motors). Therefore, it is necessary to define the thermal capacity in the catalogues of the speed reducer with a solid input shaft, as it is done by worm and helical-worm gear units which operate with much lower efficiency. Some manufacturers [3] pay necessary attention to this factor and thus enable the proper selection of gear reducers; this means they have prepared certain procedures to be undertaken if such occasion occurs, in order to overcome possible problems that may arise due to overheating the gear reducer. With this approach in the universal gear unit selection, some positive benefits can be surely achieved in the market of gear reducers, and that should not be ignored. | URI: | https://open.uns.ac.rs/handle/123456789/1054 | ISSN: | 13303651 | DOI: | 10.17559/TV-20170329230603 |
Appears in Collections: | TF Publikacije/Publications |
Show full item record
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.