Browsing by Author Tadic B.
Showing results 1 to 20 of 26
next >
Issue Date | Title | Author(s) |
---|---|---|
1-Sep-2017 | Analysis of ball-burnishing impact on barrier properties of wood workpieces | Vukelić, Đorđe ; Tadic B.; Dzunic D.; Kocovic V.; Brzakovic L.; Živković, Milica; Simunovic G. |
1-Jan-2015 | Analysis of the influence of loading and the plasticity index on variations in surface roughness between two flat surfaces | Todorović P.; Tadic B.; Vukelić, Đorđe ; Jeremić, Marija ; Randjelovic S.; Nikolic R. |
1-Jun-2012 | Application of multi-criteria assessment in evaluation of motor vehicles' environmental performances | Agarski, Boris ; Kljajin M.; Budak, Igor ; Tadic B.; Vukelić, Đorđe ; Bosak M.; Hodolic J. |
1-Jan-2014 | Comparative model analysis of two types of clamping elements in dynamic conditions | Todorovic P.; Buchmeister B.; Djapan M.; Vukelić, Đorđe ; Milošević, Mijodrag; Tadic B.; Radenkovic M. |
30-May-2011 | Conservative-force-controlled feed drive system for down milling | Tadic B.; Vukelić, Đorđe ; Hodolic J.; Mitrović, Slobodan ; Eric M. |
1-Mar-2019 | Eco-design of fixtures based on life cycle and cost assessment | Vukelić, Đorđe ; Agarski, Boris ; Budak, Igor ; Simunovic G.; Buchmeister B.; Jakovljevic Z.; Tadic B. |
1-Oct-2012 | Efficient workpiece clamping by indenting cone-shaped elements | Tadic B.; Jeremić, Biljana ; Todorovic P.; Vukelić, Đorđe ; Proso U.; Mandić, Vladimir ; Budak, Igor |
1-Jul-2011 | Failure analysis and effects of redesign of a polypropylene yarn twisting machine | Tadic B.; Todorovic P.; Vukelić, Đorđe ; Jeremić, Biljana |
1-Jan-2015 | Fixture layout design based on a single-surface clamping with local deformation | Tadic B.; Todorovic P.; Novkinic B.; Buchmeister B.; Radenkovic M.; Budak, Igor ; Vukelić, Đorđe |
21-Nov-2011 | Implementation of automatic identification technology in a process of fixture assembly/disassembly | Ostojić, Gordana ; Stankovski, Stevan ; Vukelić, Đorđe ; Lazarevic M.; Hodolic J.; Tadic B.; Odri, Stevan |
1-Apr-2018 | Increasing stiffness of constructions through application of enhancing elements | Tadic B.; Matejic M.; Simunovic G.; Kljajin M.; Kocovic V.; Bogdanovic B.; Vukelić, Đorđe |
1-Jan-2019 | The influence of vacuum level on the friction force acting on the pneumatic cylinder sealing ring | Tadic B.; Živković, Milica; Simunovic G.; Kocovic V.; Sarić, Andrija ; Vukelić, Đorđe |
11-Aug-2011 | An integral system for automated cutting tool selection | Ostojić, Gordana ; Tadic B.; Lužanin, Ognjan ; Stankovski, Stevan ; Vukelić, Đorđe ; Budak, Igor ; Miladinovic L. |
1-Oct-2016 | Intelligent design and optimization of machining fixtures | Vukelić, Đorđe ; Simunovic G.; Tadic B.; Buchmeister B.; Sarić, Andrija ; Simeunović, Nenad |
1-Jan-2017 | Investigation of ball burnishing processing on mechanical characteristics of wooden elements | Babić, Mladen ; Kocovic V.; Vukelić, Đorđe ; Mihajlovic G.; Erić, Mirjana; Tadic B. |
26-Sep-2013 | Locating and clamping of complex geometry workpieces with skewed holes in multiple-constraint conditions | Tadic B.; Bogdanovic B.; Jeremić, Biljana ; Todorovic P.; Lužanin, Ognjan ; Budak, Igor ; Vukelić, Đorđe |
14-Mar-2011 | Machining fixture assembly/disassembly in RFID environment | Vukelić, Đorđe ; Ostojić, Gordana ; Stankovski, Stevan ; Lazarevic M.; Tadic B.; Hodolic J.; Simeunović, Nenad |
1-Jan-2014 | Model testing of fixture-workpiece interface compliance in dynamic conditions | Tadic B.; Vukelić, Đorđe ; Miljanic D.; Bogdanovic B.; Macuzic I.; Budak, Igor ; Todorovic P. |
1-Mar-2018 | Modelling and simulation of a novel modular fixture for a flexible manufacturing system | Matejic M.; Tadic B.; Lazarević, Milovan; Misic M.; Vukelić, Đorđe |
12-Mar-2014 | Modelling of dynamic compliance of fixture/workpiece interface | Todorovic P.; Vukelić, Đorđe ; Tadic B.; Veljkovic D.; Budak, Igor ; Macuzic I.; Lalić, Bojan |