Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/9864
Назив: | Hob for worm gear manufacturing with circular profile | Аутори: | Simon V. | Датум издавања: | 1-јан-1993 | Часопис: | International Journal of Machine Tools and Manufacture | Сажетак: | A method is developed for the design and manufacturing of the hob for processing a worm gear with circular axial profile. The calculation includes the determination of the generator surface and the cutting edge profile of the hob, the profile of the conical, dished, and pencil-type grinding wheel for relief grinding the hob teeth, the optimal values of setting angles of the grinding wheel axis to improve the precision of the resharpened hob, and the determination of deviations of the cutting edge of the resharpened hob from the required profile. The corresponding computer program is developed. By using this program the influence of the lead angle of the hob and the diameter of the dished grinding wheel for hob tooth relief grinding on the optimal values of setting angles is investigated. The obtained results show that by using the optimal machine setting, the precision of the resharpened hob is considerably improved. © 1993. | URI: | https://open.uns.ac.rs/handle/123456789/9864 | ISSN: | 08906955 | DOI: | 10.1016/0890-6955(93)90096-D |
Налази се у колекцијама: | Naučne i umetničke publikacije |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
26
проверено 09.09.2023.
Преглед/и станица
6
Протекла недеља
2
2
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.