Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/9549
Title: | Curing characteristics of low emission urea-formaldehyde adhesive in the presence of wood | Authors: | Popović, Mlađan Miljković, Jovan Budinski-Simendić, Jaroslava Pavličević, Jelena Ristić, Ivan |
Issue Date: | 2011 | Publisher: | Bratislava : Slovenský drevársky výskumný ústav | Journal: | Wood Research | Abstract: | Urea-formaldehyde (UF) resin presents, by far, the most utilized adhesive system in the manufacture of particleboard and fiberboard. At the temperatures above 100°C in the presence of catalyst, this resin undergoes cross-linking reaction and bonding of wood particles in a hot press. In this work the cross-linking of the new type of commercial UF adhesive for El type of wood based panels was studied using infra red (IR) spectroscopy and differential scanning calorimetry (DSC). IR spectra of examined UF adhesive showed distinctive characteristics in comparison to the older types of UF adhesives. The influence of different industrial wood species (obtained from beech, fir and poplar) on the curing behavior of wood-flour/adhesive mixtures has been evaluated using DSC method. The peak temperature and enthalpy of the curing reaction were evaluated from scans obtained with different heating rates. The activation energy for the curing reaction of pure adhesive and for wood-flour/adhesive mixtures was calculated using the Kissinger method. | URI: | https://open.uns.ac.rs/handle/123456789/9549 | ISSN: | 13364561 |
Appears in Collections: | TF Publikacije/Publications |
Show full item record
SCOPUSTM
Citations
4
checked on Feb 22, 2020
Page view(s)
42
Last Week
13
13
Last month
5
5
checked on May 10, 2024
Google ScholarTM
Check
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.