Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/8961
Назив: | Improving mechanical properties of flowable dental composite resin by adding silica nanoparticles | Аутори: | Baloš, Sebastian Pilić, Branka Petronijević Šarčev, Branislava Marković, Dubravka Mirković, Siniša Šarčev, Ivan |
Кључне речи: | composite resins;surface properties;material testing;nanoparticles;silicon dioxide | Датум издавања: | 1-мај-2013 | Издавач: | Belgrade: Military Medical Academy, INI | Часопис: | Vojnosanitetski Pregled | Сажетак: | Background/Aim. The main drawback of flowable dental composite resin is low strength compared to conventional composite resin, due to a low amount of filler, neccessary for achieving low viscosity and ease of handling. The aim of this study was to improve mechanical properties of flowable dental composite resin by adding small amount of nanopar-ticles, which would not compromise handling properties. Methods. A commercially available flowable dental composite resin material was mixed with 7 nm aftertreated hy-drophobic fumed silica and cured by an UV lamp. Four sets of samples were made: control sample (unmodified), the sample containing 0.05%, 0.2% and 1% nanosilica. Flexural modulus, flexural strength and microhardness were tested. One-way ANOVA followed by Tukey's test with the significance value of p < 0.05 was performed to statistically analyze the obtained results. Furthermore, differential scanning calorimetry (DSC) and SEM analysis were performed. To asses handling properties, slumping resistance was determined. Results. It was found that 0.05% is the most effective nanosilica content. All the tested mechanical properties were improved by a significant margin. On the other hand, when 0.2% and 1% nanosilica content was tested, different results were obtained, some of the mechanical properties even dropped, while some were insignificantly improved. The difference between slumping resistance of unmodified and modified samples was found to be statistically insignificant. Conclusions. Low nanosilica addition proved more effective in improving mechanical properties compared to higher additions. Furthermore, handling properties are unaffected by nanosilica addition. | URI: | https://open.uns.ac.rs/handle/123456789/8961 | ISSN: | 00428450 | DOI: | 10.2298/VSP1305477B |
Налази се у колекцијама: | TF Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
26
проверено 10.05.2024.
Преглед/и станица
45
Протекла недеља
8
8
Протекли месец
10
10
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.