Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/8521
Назив: | Novel elastomeric polyurethane fibers modified with polypropylene microfibers | Аутори: | Jašo, Vladislav Milić J. Divjaković, Vladimir Petrović Z. |
Датум издавања: | 1-дец-2013 | Часопис: | European Polymer Journal | Сажетак: | Extrusion of immiscible polymer biphasic blends to form in situ microfibers of the minor component in the matrix of the major component is an elegant way to create composites with new properties. The process was used to obtain thermoplastic polyurethane elastomers modified with polypropylene microfibers. The effect of phase interaction on blend morphology and properties was studied by running a series of blends with and without a maleated polypropylene compatibilizer. Six different blends were prepared: three with compatibilizer and three without the compatibilizer. All blends contained polypropylene as a minor component (80/20; 90/10 and 95/5). Extrusion spinning of polyurethane/polypropylene blends with and without compatibilizer resulted in polyurethane fibers modified with highly-oriented polypropylene microfibrils at all component ratios. Increasing polypropylene concentration in the thermoplastic polyurethane matrix increased hardness and modulus, but did not affect tensile strength and lowered elastic recovery. © 2013 Elsevier Ltd. All rights reserved. | URI: | https://open.uns.ac.rs/handle/123456789/8521 | ISSN: | 00143057 | DOI: | 10.1016/j.eurpolymj.2013.09.001 |
Налази се у колекцијама: | Naučne i umetničke publikacije |
Приказати целокупан запис ставки
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.