Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/7448
Nаziv: | Design and construction of a shield for the 9″ × 9″ NaI(Tl) well-type detector | Аutоri: | Hansman, Jan | Dаtum izdаvаnjа: | 1-јан-2014 | Čаsоpis: | Nuclear Technology and Radiation Protection | Sažetak: | This paper describes a homemade lead, 15 cm-thick, cylindrical shaped shield of a 9″ × 9″ NaI(Tl) gamma spectrometric well-type detector. Commercially available lead was melted into cylindrical rings. The molds for the cylindrical rings were made from hard-cooked beech wood which was pressed in a sand mold to make the final mold. After cooling, the lead rings and ring edges were sanded, transported from the foundry to the laboratory of the Department of Physics in Novi Sad, Serbia, and assembled in the detector shield. The total mass of the shield is 2622 kg. Some lines inside the shield are reduced almost 200 times and the total count rate (280 keV-3000 keV) is reduced 132.7 times. | URI: | https://open.uns.ac.rs/handle/123456789/7448 | ISSN: | 14513994 | DOI: | 10.2298/NTRP1402165H |
Nаlаzi sе u kоlеkciјаmа: | PMF Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
5
prоvеrеnо 03.05.2024.
Prеglеd/i stаnicа
22
Prоtеklа nеdеljа
9
9
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.