Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/7325
Nаziv: | Selection of filter media for steady-state bed coalescers | Аutоri: | Šećerov Sokolović, Radmila Govedarica, Dragan Sokolović, Dunja |
Dаtum izdаvаnjа: | 12-феб-2014 | Izdаvаč: | American Scientific Publishers | Čаsоpis: | Industrial and Engineering Chemistry Research | Sažetak: | In petrochemical industries oil-in-water dispersion separation is important due to economic, ecological, and safety reasons. If the coalescer is a part of the central unit for wastewater treatment, then it is able to separate oil with different properties in time. Designing such a coalescer is complicated even when this is based on experimental results. This work contributes to the design strategy of the coalescer for the separation of oil of different quality. In this work four different polymeric fibers were tested for separation of model dispersions encompassing four mineral oils of different properties. Experiments were carried out over a wide range of oil properties, bed permeability, and fluid velocities. Selection of filter media was made on the basis of 80 experiments. Contour diagrams which give the dependence of bed permeability, the properties of oil, and the critical fluid velocity enable reliable and easy selection of filter material for steady-state bed coalescence. © 2014 American Chemical Society. | URI: | https://open.uns.ac.rs/handle/123456789/7325 | ISSN: | 08885885 | DOI: | 10.1021/ie404013e |
Nаlаzi sе u kоlеkciјаmа: | TF Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
SCOPUSTM
Nаvоđеnjа
13
prоvеrеnо 03.05.2024.
Prеglеd/i stаnicа
23
Prоtеklа nеdеljа
1
1
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.