Glycolyzed poly(ethylene terephthalate) waste and castor oil-based polyols for waterborne polyurethane adhesives containing hexamethoxymethyl melamine

Abstract

Glycolysis of poly(ethylene terephthalate) (PET) waste using different molar ratio of poly(ethylene glycol) (PEG400), was used to produce saturated hydroxyl-functional polyester polyols with castor oil (CO) by transesterification process. The waterborne polyurethane (WBPU) adhesives were synthesized from these saturated polyester polyols, isophorone diisocyanate (IPDI), dimethylolpropionic acid (DMPA), and hexamethoxymethyl melamine (HMMM) as cross-linking agent by a conventional prepolymer process. The glycolyzed polyols and polyester polyos formations were characterized using Fourier transform infrared spectroscopy (FTIR) and the molecular weights were determined using gel permeation chromatography (GPC). The cross-linking reaction between WBPU and HMMM was verified using FTIR and 1H NMR analysis. Thermal properties were investigated by thermogravimetric analysis (TG). Thermal stability of cross-linked WBPU significantly increased with decreasing castor oil content in the process of transesterification to obtain polyester polyol as a soft segment. The T15% and T50% (the temperature where 15 and 50% weight loss occurred) of WBPU increased with the decreasing of castor oil content in the obtained polyester polyols, caused by the steric hindrance of polyester polyol with higher castor oil content, in the process of cross-linking reactions with HMMM. The physico-mechanical properties of WBPU, such as hardness, adhesion test, and gloss of the dried films were also determined considering the effect of participation of HMMM in cross-linking reactions with polyurethane, on coating properties.