Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/6052
Поље DC-а | Вредност | Језик |
---|---|---|
dc.contributor.author | Bikić, Siniša | en |
dc.contributor.author | Uzelac D. | en |
dc.contributor.author | Bukurov, Maša | en |
dc.contributor.author | Todorović, Bogoljub | en |
dc.contributor.author | Tašin, Slobodan | en |
dc.date.accessioned | 2019-09-30T08:52:16Z | - |
dc.date.available | 2019-09-30T08:52:16Z | - |
dc.date.issued | 2015-07-15 | en |
dc.identifier.issn | 3787788 | en |
dc.identifier.uri | https://open.uns.ac.rs/handle/123456789/6052 | - |
dc.description.abstract | © 2015 Elsevier B.V. All rights reserved. The damper used for the control of airflow in heating, ventilation and air conditioning systems can constructively be adapted to measure the air velocity with its moment characteristic. It is a device that indirectly determines the air velocity by measuring the position of the blades and the air stream moment acting on it. The subject of this paper is energy consumption of the air torque position damper depending on its structure. The aim is to compare the energy consumption of four possible types of dampers with non-cascading blades: with one blade, with two cross-guided blades, with two parallels-guided blades and with two blades, one of which is a measuring blade and the other remains fixed in horizontal position. The case when there is a straight section of a duct both in front of and behind the damper was considered. Adequacy of the existing mathematical model and energy consumption for all four types of dampers was determined experimentally. It was found that the damper with two blades of which one is a measuring blade and other remains fixed in horizontal position had minimal energy consumption. | en |
dc.relation.ispartof | Energy and Buildings | en |
dc.title | Air torque position damper energy consumption analysis | en |
dc.type | Journal/Magazine Article | en |
dc.identifier.doi | 10.1016/j.enbuild.2015.04.009 | en |
dc.identifier.scopus | 2-s2.0-84929452844 | en |
dc.identifier.url | https://api.elsevier.com/content/abstract/scopus_id/84929452844 | en |
dc.relation.lastpage | 139 | en |
dc.relation.firstpage | 131 | en |
dc.relation.volume | 99 | en |
item.fulltext | No Fulltext | - |
item.grantfulltext | none | - |
crisitem.author.dept | Departman za energetiku i procesnu tehniku | - |
crisitem.author.dept | Departman za energetiku i procesnu tehniku | - |
crisitem.author.dept | Departman za energetiku i procesnu tehniku | - |
crisitem.author.dept | Departman za energetiku i procesnu tehniku | - |
crisitem.author.parentorg | Fakultet tehničkih nauka | - |
crisitem.author.parentorg | Fakultet tehničkih nauka | - |
crisitem.author.parentorg | Fakultet tehničkih nauka | - |
crisitem.author.parentorg | Fakultet tehničkih nauka | - |
Налази се у колекцијама: | FTN Publikacije/Publications |
SCOPUSTM
Навођења
5
проверено 09.09.2023.
Преглед/и станица
35
Протекла недеља
3
3
Протекли месец
6
6
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.