Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/5144
Назив: | A study on the generation of a fine-grained layer in upsetting between flat and conical dies | Аутори: | Goldstein R. Alexandrov S. Vilotić, Dragiša Sidjanin L. |
Датум издавања: | 1-јан-2016 | Часопис: | Conference Proceedings of the Society for Experimental Mechanics Series | Сажетак: | © The Society for Experimental Mechanics, Inc. 2016. A narrow fine-grained layer is generated in the vicinity of frictional interfaces in many manufacturing processes. The majority of previous studies on this topic is devoted to machining. The present is paper concerned with the generation of a fine-grained layer in upsetting of hollow cylinders between flat and conical dies. The layer occurs in the vicinity of the friction surface between the specimen and the conical die. The die angle varies to change the state of stress and strain near the friction surface. No lubricant is used to increase the friction stress. Based on a proposed criterion that defines the finegrained layer, it is demonstrated that its thickness depends on the die angle. Moreover, the thickness varies along the friction surface. A general continuum mechanics model is proposed to connect the thickness of the fine-grained layer and the strain rate intensity factor. The model is based on dimensional analysis and a number of general assumptions. The strain rate intensity factor in the upsetting process is determined by an approximate method. Then, the experimental results are used to find some input parameters of the theoretical model. | URI: | https://open.uns.ac.rs/handle/123456789/5144 | ISBN: | 9783319224480 | ISSN: | 21915644 | DOI: | 10.1007/978-3-319-22449-7_22 |
Налази се у колекцијама: | Naučne i umetničke publikacije |
Приказати целокупан запис ставки
Преглед/и станица
7
Протекла недеља
3
3
Протекли месец
0
0
проверено 03.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.