Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/4645
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Terek, Pal | en |
dc.contributor.author | Kovačević, Lazar | en |
dc.contributor.author | Miletić, Aleksandar | en |
dc.contributor.author | Panjan P. | en |
dc.contributor.author | Baloš, Sebastian | en |
dc.contributor.author | Škorić, Branko | en |
dc.contributor.author | Kakaš D. | en |
dc.date.accessioned | 2019-09-23T10:35:50Z | - |
dc.date.available | 2019-09-23T10:35:50Z | - |
dc.date.issued | 2016-06-15 | en |
dc.identifier.issn | 431648 | en |
dc.identifier.uri | https://open.uns.ac.rs/handle/123456789/4645 | - |
dc.description.abstract | © 2016 Elsevier B.V.. In the process of high pressure die casting of aluminium alloys tool surfaces are severely damaged by cast alloy sticking and soldering which promote galling during casting ejection. As a consequence, casting quality is lowered and production efficiency is reduced. Although die casting tools are greatly improved by application of diffusion layers and surface coatings, effects of surface topography on performance of such treated tools are scarcely recognized. This investigation gives an insight in the effects of surface topography on the sticking tendency and galling of Al-Si alloy toward the H11 steel, plasma nitrided steel, and duplex treated steel with CrN and TiAlN PVD top coatings. The sticking tendency was evaluated by ejection test during which the force required to eject the sample from the casting was measured. It was found that the ejection force does not depend on chemical composition of the investigated materials. However, the ejection force of coated samples strongly depends on their surface topography. The coated samples which were polished after the deposition exhibited the highest ejection force. Wear conditions inherent in this specific tribo-system are recognised and interpreted for surfaces with different topography. | en |
dc.relation.ispartof | Wear | en |
dc.title | Effects of die core treatments and surface finishes on the sticking and galling tendency of Al-Si alloy casting during ejection | en |
dc.type | Journal/Magazine Article | en |
dc.identifier.doi | 10.1016/j.wear.2016.03.016 | en |
dc.identifier.scopus | 2-s2.0-84962198865 | en |
dc.identifier.url | https://api.elsevier.com/content/abstract/scopus_id/84962198865 | en |
dc.relation.lastpage | 134 | en |
dc.relation.firstpage | 122 | en |
dc.relation.volume | 356-357 | en |
item.fulltext | No Fulltext | - |
item.grantfulltext | none | - |
crisitem.author.dept | Departman za proizvodno mašinstvo | - |
crisitem.author.dept | Departman za proizvodno mašinstvo | - |
crisitem.author.dept | Departman za proizvodno mašinstvo | - |
crisitem.author.dept | Departman za proizvodno mašinstvo | - |
crisitem.author.parentorg | Fakultet tehničkih nauka | - |
crisitem.author.parentorg | Fakultet tehničkih nauka | - |
crisitem.author.parentorg | Fakultet tehničkih nauka | - |
crisitem.author.parentorg | Fakultet tehničkih nauka | - |
Appears in Collections: | FTN Publikacije/Publications |
SCOPUSTM
Citations
25
checked on May 6, 2023
Page view(s)
43
Last Week
9
9
Last month
0
0
checked on May 10, 2024
Google ScholarTM
Check
Altmetric
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.