Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе: https://open.uns.ac.rs/handle/123456789/1584
Nаziv: Profiles of polycyclic aromatic hydrocarbons in smoke from combustion and thermal decomposition of poplar wood pellets and sawdust
Аutоri: Škrbić, Biljana 
Marinković, Vesna 
Spaić, Saša
Milanko, Verica
Branovački, Slađana 
Dаtum izdаvаnjа: 1-јун-2018
Izdаvаč: Elsevier
Čаsоpis: Microchemical Journal
Sažetak: © 2018 Elsevier B.V. The aim of this paper is to determine the level and distribution of the sixteen polycyclic aromatic hydrocarbons (PAHs) listed by the US Environmental Protection Agency (US-EPA) in smoke from poplar wood pellets and sawdust combustion and thermal decomposition, respectively. Namely, the growth of selected poplar plantations, wood cultivation and production in the north part of the Republic of Serbia, Vojvodina Province, considerably increased. However, mechanical wood processing creates a lot of sawdust, which causes an occupational and environmental risk and also poses a fire hazard. Furthermore, in order to protect the environment and provide additional energy sources, sawdust is commonly pelletized and further used as a fuel. Thus, the assessment of environmental impact of its use becomes an important issue. Therefore, the intention of the authors was to determine the level and profile of PAHs emitted by combustion and thermal decomposition under atmospheric conditions of poplar wood pellets and sawdust. The 16 US-EPA PAHs were analyzed by gas chromatograph with mass selective detector. The level of total US-EPA 16 PAHs formed during combustion of wood pellets was 4.7 mg kg−1, whereas during the sawdust combustion it was 3.8 mg kg−1, while the resulting total PAHs concentration during thermal degradation under atmospheric conditions of pellets and sawdust was 3.4 mg kg−1 and 3.7 mg kg−1, respectively. The most common PAHs present in smoke from the combustion and thermal decomposition under atmospheric conditions of poplar wood pellets were phenanthrene, fluorene and naphthalene, while from the sawdust were phenanthrene, naphthalene, acenaphthylene and fluorene, respectively. BaPeq value obtained during the combustion of wood pellets was 0.081 mg kg−1, whereas from the combustion of sawdust it was 0.047 mg kg−1, while the resulting BaPeq value during the thermal degradation under atmospheric conditions of pellets and sawdust was 0.057 mg kg−1 and 0.049 mg kg−1, respectively. Biomass densification process did not affect PAHs emission neither during the combustion process nor the thermal decomposition process. To the best of our knowledge, it is the first study which considers the level and profile of PAHs found in smoke from the combustion and thermal decomposition of poplar clone I-214 (P. x euramericana cl. I-214) cultivated in the Republic of Serbia.
URI: https://open.uns.ac.rs/handle/123456789/1584
ISSN: 0026265X
DOI: 10.1016/j.microc.2018.02.007
Nаlаzi sе u kоlеkciјаmа:TF Publikacije/Publications

Prikаzаti cеlоkupаn zаpis stаvki

SCOPUSTM   
Nаvоđеnjа

22
prоvеrеnо 03.05.2024.

Prеglеd/i stаnicа

49
Prоtеklа nеdеljа
32
Prоtеkli mеsеc
0
prоvеrеnо 03.05.2024.

Google ScholarTM

Prоvеritе

Аlt mеtrikа


Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.