Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/15537
Назив: | Geometry, mechanical properties and mounting of perforated plates for ballistic application | Аутори: | Baloš, Sebastian Grabulov V. Sidjanin L. Pantić, Milan Radisavljevic I. |
Датум издавања: | 1-јун-2010 | Часопис: | Materials and Design | Сажетак: | In this paper, the ballistic resistance of perforated plates made of different types of steel, mounting and geometry was investigated. Different types of steel in various heat treatment conditions were tested. Target mounting was also varied: rigid, oblique and hanging. Furthermore, four different perforated plate geometries were tested: two plate thicknesses and two hole diameters. Their behaviour was tested using impact from firing 12.7 mm M-8 API ammunition at eleven perforated plate samples. These samples were placed by means of a steel frame over a 13 mm RHA plate, at two distances. Damaged area on targets was correlated to ballistic resistance of the whole armour to find the optimal perforated plate. It was found that perforated plates, in optimized case offer a frequent fracture of the penetrating core in up to five parts. This debris is unable to penetrate the basic plate, offering mass effectiveness of the whole armour model of 1.76 and the mass effectiveness of the perforated plate of 5.91. © 2009 Elsevier Ltd. All rights reserved. | URI: | https://open.uns.ac.rs/handle/123456789/15537 | ISSN: | 02641275 | DOI: | 10.1016/j.matdes.2009.12.031 |
Налази се у колекцијама: | PMF Publikacije/Publications |
Приказати целокупан запис ставки
SCOPUSTM
Навођења
29
проверено 20.11.2023.
Преглед/и станица
24
Протекла недеља
10
10
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Алт метрика
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.