Молимо вас користите овај идентификатор за цитирање или овај линк до ове ставке:
https://open.uns.ac.rs/handle/123456789/13541
Назив: | Influence of multicomponent powder characteristics on mechanical properties of ceramic proppants | Аутори: | Marinkovic-Neducin R. Ranogajec, Jonjaua Mihalj V. |
Датум издавања: | 1-дец-1993 | Часопис: | International Journal of Materials and Product Technology | Сажетак: | The critical phase in production of specific ceramic materials for hydraulic fracturing in oil/gas production - proppants - is considered to be the formation of high green density spheres of defined diameter (0.4-1.25 mm) from the complex raw material mixture. The degree of sphericity and roundness, as well as the mechanical strength of proppants dependent on the physico-chemical characteristics of the starting powder (multi-component system) and on the procedure and parameters of sphere formation. Two systems, based on alumina and bauxite, both in combination with clay and feldspar, have been investigated as candidate mixtures for intermediate strength/intermediate density proppant (ISP) production. It has been shown that in obtaining the optimal properties of final system-proppant, good packing in green state is less important than the interaction of plastic and non-plastic components during sintering in the closed system. The physico-chemical properties of the liquid phase seem to play a dominant role in obtaining the desired microstructure and resulting mechanical properties. | URI: | https://open.uns.ac.rs/handle/123456789/13541 | ISSN: | 02681900 |
Налази се у колекцијама: | TF Publikacije/Publications |
Приказати целокупан запис ставки
Преглед/и станица
17
Протекла недеља
6
6
Протекли месец
0
0
проверено 10.05.2024.
Google ScholarTM
Проверите
Ставке на DSpace-у су заштићене ауторским правима, са свим правима задржаним, осим ако није другачије назначено.