Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/12438
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Tadic B. | en |
dc.contributor.author | Jeremić, Biljana | en |
dc.contributor.author | Todorovic P. | en |
dc.contributor.author | Vukelić, Đorđe | en |
dc.contributor.author | Proso U. | en |
dc.contributor.author | Mandić, Vladimir | en |
dc.contributor.author | Budak, Igor | en |
dc.date.accessioned | 2020-03-03T14:48:30Z | - |
dc.date.available | 2020-03-03T14:48:30Z | - |
dc.date.issued | 2012-10-01 | en |
dc.identifier.issn | 22347593 | en |
dc.identifier.uri | https://open.uns.ac.rs/handle/123456789/12438 | - |
dc.description.abstract | Machining fixtures which utilize screw-or strap clamps are widely used in manufacturing. Typical for them is that the cutting forces are balanced by the friction forces which act on the contact surfaces (interfaces) between clamping elements (screw-or strap clamps) and workpiece. This paper analyses load capacity and compliance of these interfaces. In order to increase their load capacity and reduce compliance, a method is proposed which is based on indenting sharp cone-shaped clamping elements into workpiece material using appropriate surfaces which are not machined, and are not expected to satisfy any particular aesthetic demands (most often castings and forgings). The results of numerical simulations and experimental investigation reveal substantial advantages of the proposed clamping method, offering possibility for industrial application and further investigation. © KSPE and Springer 2012. | en |
dc.relation.ispartof | International Journal of Precision Engineering and Manufacturing | en |
dc.title | Efficient workpiece clamping by indenting cone-shaped elements | en |
dc.type | Journal/Magazine Article | en |
dc.identifier.doi | 10.1007/s12541-012-0227-8 | en |
dc.identifier.scopus | 2-s2.0-84870555975 | en |
dc.identifier.url | https://api.elsevier.com/content/abstract/scopus_id/84870555975 | en |
dc.relation.lastpage | 1735 | en |
dc.relation.firstpage | 1725 | en |
dc.relation.issue | 10 | en |
dc.relation.volume | 13 | en |
item.fulltext | No Fulltext | - |
item.grantfulltext | none | - |
crisitem.author.dept | Pedagoški fakultet, Katedra za metodiku muzičke i likovne kulture i fizičkog vaspitanja | - |
crisitem.author.dept | Fakultet tehničkih nauka, Departman za proizvodno mašinstvo | - |
crisitem.author.dept | Fakultet tehničkih nauka, Departman za industrijsko inženjerstvo i menadžment | - |
crisitem.author.dept | Fakultet tehničkih nauka, Departman za proizvodno mašinstvo | - |
crisitem.author.orcid | 0000-0003-1096-6258 | - |
crisitem.author.orcid | 0000-0001-6996-2222 | - |
crisitem.author.parentorg | Pedagoški fakultet | - |
crisitem.author.parentorg | Fakultet tehničkih nauka | - |
crisitem.author.parentorg | Fakultet tehničkih nauka | - |
crisitem.author.parentorg | Fakultet tehničkih nauka | - |
Appears in Collections: | FTN Publikacije/Publications |
SCOPUSTM
Citations
13
checked on Sep 14, 2022
Page view(s)
34
Last Week
12
12
Last month
6
6
checked on May 10, 2024
Google ScholarTM
Check
Altmetric
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.