Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/11776
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Rajnović, Dragan | en |
dc.contributor.author | Eric O. | en |
dc.contributor.author | Sidjanin L. | en |
dc.date.accessioned | 2020-03-03T14:45:46Z | - |
dc.date.available | 2020-03-03T14:45:46Z | - |
dc.date.issued | 2012-10-05 | en |
dc.identifier.issn | 0023432X | en |
dc.identifier.uri | https://open.uns.ac.rs/handle/123456789/11776 | - |
dc.description.abstract | In present paper the effect of austempering conditions and alloying elements on the microstructure, mechanical properties and processing window of Cu and Cu + Ni alloyed austempered ductile irons has been studied. A new concept of "standard" processing window was suggested as an alternative to the well-known "microstructure" processing window. This concept is based on the ability to achieve mechanical properties required by different standards, namely ASTM, ISO and EN. The results obtained show that alloying with Cu + Ni produced ductile grades of ADI, while alloying with Cu grades of higher strength. The standard processing window depends on the austempering parameters and alloying elements, as well as standard used. The ISO and EN standards give a larger standard processing window compared to the ASTM. It was also shown, that from the engineering point of view, determination of a standard processing window gives great advantage compared to the microstructure processing window where special methods and procedures have to be used. | en |
dc.relation.ispartof | Kovove Materialy | en |
dc.title | The standard processing window of alloyed ADI mate | en |
dc.type | Journal/Magazine Article | en |
dc.identifier.doi | 10.4149/km-2012-3-199 | en |
dc.identifier.scopus | 2-s2.0-84866891362 | en |
dc.identifier.url | https://api.elsevier.com/content/abstract/scopus_id/84866891362 | en |
dc.relation.lastpage | 208 | en |
dc.relation.firstpage | 199 | en |
dc.relation.issue | 3 | en |
dc.relation.volume | 50 | en |
item.grantfulltext | none | - |
item.fulltext | No Fulltext | - |
crisitem.author.dept | Fakultet tehničkih nauka, Departman za proizvodno mašinstvo | - |
crisitem.author.parentorg | Fakultet tehničkih nauka | - |
Appears in Collections: | FTN Publikacije/Publications |
SCOPUSTM
Citations
20
checked on Sep 14, 2022
Page view(s)
17
Last Week
7
7
Last month
0
0
checked on May 10, 2024
Google ScholarTM
Check
Altmetric
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.