Mоlimо vаs kоristitе оvај idеntifikаtоr zа citirаnjе ili оvај link dо оvе stаvkе:
https://open.uns.ac.rs/handle/123456789/11510
Nаziv: | Effect of cerium and lanthanum addition on mechanical properties of bismuth titanate ceramics | Аutоri: | Pavlović, Nina Rajnović, Dragan Šiđanin, L. Srdić, Vladimir |
Dаtum izdаvаnjа: | 2009 | Čаsоpis: | Key Engineering Materials | Sažetak: | Cerium- and lanthanum- substituted bismuth titanate (Bi4-xAxTi3O12; where A=La or Ce,and x=0, 0.5 and 1) ceramics were prepared from nanopowders synthesized by coprecipitation method. The as-synthesized powders were calcined, uniaxially pressed and finally sintered at 1050°C. It was shown that sintering behaviour, phase composition and grain morphology of the obtained ceramics were influenced by the presence of lanthanum and especially cerium ions in the titanate structure. Mechanical properties (hardness and fracture toughness) were measured at room temperature on polished sample surfaces using a Vickers microhardness tester. The hardness values for of bismuth titanate based ceramics were in the range for some other important perovskite titanate, whereas their fracture toughness was somewhat higher. © (2009) Trans Tech Publications, Switzerland. | URI: | https://open.uns.ac.rs/handle/123456789/11510 | ISSN: | 10139826 | DOI: | 10.4028/www.scientific.net/KEM.409.330 |
Nаlаzi sе u kоlеkciјаmа: | TF Publikacije/Publications |
Prikаzаti cеlоkupаn zаpis stаvki
Prеglеd/i stаnicа
26
Prоtеklа nеdеljа
8
8
Prоtеkli mеsеc
0
0
prоvеrеnо 10.05.2024.
Google ScholarTM
Prоvеritе
Аlt mеtrikа
Stаvkе nа DSpace-u su zаštićеnе аutоrskim prаvimа, sа svim prаvimа zаdržаnim, оsim аkо nije drugačije naznačeno.