Прегледање према Департман Departman za proizvodno mašinstvo
Приказивање резултата 362 do 376 od 376
< претходна
| Датум издавања | Наслов | Аутор(и) |
|---|---|---|
| 1-дец-2011 | Upsetting of bimetallic components in closed die | Plančak M.; Car Z.; Vilotić D.; Movrin, Dejan ; Kršulja M. |
| 1-јул-2009 | Use of SEM and EDS analysis in the investigation of Al-Si-Cu piston alloy cast Porosity | Kakaš D.; Kovačević, Lazar ; Terek, Pal ; Krumes D.; Kolumbić Z. |
| 1-јан-2016 | Using a high-stiffness burnishing tool for increased dimensional and geometrical accuracies of openings | Tadic B.; Randjelovic S.; Todorovic P.; Živković, Jasmina ; Kocovic V.; Budak, Igor ; Vukelić, Đorđe |
| 1-јан-2016 | Using advanced CAM system in modern machining | Djurica D.; Sekulić, Mirjana; Kramar D.; Kovač P.; Gostimirović, Marin |
| 1-дец-2011 | Using CAD/CAE software systems in the design process of modular, revision total hip end oprosthesis | Tabaković, Slobodan ; Živković, Aleksandar ; Grujić, Jasmina ; Zeljković, Milan |
| 1-сеп-2019 | Using pre-processing and indenting of contact interface to improve fixture clamping efficiency | Vukelić, Đorđe ; Tadic B.; Bogdanovic B.; Todorovic P. |
| 1-јул-2013 | Using specially designed high-stiffness burnishing tool to achieve high-quality surface finish | Tadic B.; Todorovic P.; Lužanin, Ognjan ; Miljanic D.; Jeremić, Biljana ; Bogdanovic B.; Vukelić, Đorđe |
| 8-апр-2019 | Using statistically designed experiment to optimize vacuum-assisted post-processing of binder jetted specimens | Movrin, Dejan ; Lužanin, Ognjan ; Guduric V. |
| 1-феб-2019 | Using the temperature method for the prediction of tool life in sustainable production | Kovac P.; Gostimirović, Marin ; Rodić, Dragan; Savković, Borislav |
| 2005 | Uticaj vodnog deficita na epidermalno tkivo liske šećerne repe | Perčić M.; Luković Jadranka ; Maksimović Ivana ; Kovačev Lazar ; Nagl Nevena |
| 2011 | Visible upconversion emission of Er3+ doped LiInO2 | Đačanin Ljubica ; Dramićanin Miroslav ; Lukić-Petrović Svetlana ; Petrović Dragoslav; Nikolić Marko |
| 2012 | Visible upconversion emission of Er3+-doped and Er3+/Yb3+-codoped LiInO2 | Đačanin Ljubica ; Dramićanin Miroslav ; Lukić-Petrović Svetlana ; Petrović Dragoslav; Nikolić Marko |
| 9-јул-2012 | Wear intensity of diferent heat treated nodular cast irons | Golubović D.; Kovač P.; Ješić D.; Gostimirović, Marin ; Pucovsky V. |
| 26-мар-2018 | Wear Resistance Increase by Friction Stir Processing for Partial Magnesium Replacement in Aluminium Alloys | Baloš, Sebastian ; Labus Zlatanović, Danka ; Janjatović, Petar ; Dramićanin, Miroslav ; Rajnović, Dragan ; Sidjanin L. |
| 1-мар-2010 | Wire fence as applique armour | Baloš, Sebastian ; Grabulov V.; Sidjanin L.; Pantić, Milan |