Прегледање према Аутор Terek, Pal

Приказивање резултата 1 do 13 od 13
Датум издавањаНасловАутор(и)
1-јан-2014Dependence of interfacial heat transfer coefficient on casting surface temperature during solidification of Al-Si alloy castings cast in CO2 sand moldKovačević, Lazar ; Terek, Pal ; Miletić, Aleksandar; Kakaš D.
15-јун-2016Effects of die core treatments and surface finishes on the sticking and galling tendency of Al-Si alloy casting during ejectionTerek, Pal ; Kovačević, Lazar ; Miletić, Aleksandar; Panjan P.; Baloš, Sebastian ; Škorić, Branko ; Kakaš D.
1-јан-2017Ejection performance of coated core pins intended for application on high pressure die casting tools for aluminium alloys processingTerek, Pal ; Kovačević, Lazar ; Miletić, Aleksandar; Kukuruzović, Dragan ; Škorić, Branko ; Drnovšek A.; Panjan P.
1-апр-2019Improved ejection test for evaluation of soldering tendency of cast alloy to die core materialsTerek, Pal ; Kovačević, Lazar ; Miletić, Aleksandar; Kukuruzović, Dragan ; Baloš, Sebastian ; Škorić, Branko 
1-мај-2018Industrial evaluation of duplex PVD hard coatings for HPDCKovačević, Lazar ; Terek, Pal ; Miletić, Aleksandar; Kukuruzović, Dragan ; Škorić, Branko ; Panjan P.
14-окт-2021Influence of fluorine-containing mouthwashes on NiTi Alloy corrosionZoran Bobić; Bojan Petrović ; Sanja Kojić ; Vladimir Terek ; Branko Škorić ; Lazar Kovačević ; Goran Stojanović ; Pal Terek 
1-јун-2011Influence of interfacial layer thickness and substrate roughness on adhesion of TiN coatings deposited at low temperatures by IBADKakas D.; Terek, Pal ; Kovačević, Lazar ; Miletic A.; Škorić, Branko 
1-дец-2009Influence of load and sliding speed on friction coefficient of IBAD deposited TiNKakaš D.; Škorić, Branko ; Mitrović, Slobodan; Babić, Mladen ; Terek, Pal ; Miletić A.; Vilotić, Marko 
1-јан-2014Influence of substrate roughness on adhesion of TiN coatingsMiletić, Aleksandar; Terek, Pal ; Kovačević, Lazar ; Vilotić, Marko ; Kakaš D.; Škorić, Branko ; Kukuruzović, Dragan 
4-сеп-2012Mechanical properties of tin coatings deposited at different temperatures by IBAD processKakaš D.; Škorić, Branko ; Terek, Pal ; Kovačević, Lazar ; Vilotić, Marko 
16-сеп-2011Neutral radius value determination by numerical simulation method at ring upsetting testVilotić, Marko ; Kakaš D.; Terek, Pal ; Kovačević, Lazar ; Miletić A.
1-јан-2009Surface roughness and friction coefficient in IBAD deposited Tin Hard coatingKakaš D.; Škorić, Branko ; Babić, Mladen ; Mitrović, Dušanka; Miletić, Aleksandar; Vilotić, Marko ; Terek, Pal ; Kovačević, Lazar 
1-јул-2009Use of SEM and EDS analysis in the investigation of Al-Si-Cu piston alloy cast PorosityKakaš D.; Kovačević, Lazar ; Terek, Pal ; Krumes D.; Kolumbić Z.
Приказивање резултата 1 do 13 od 13