Please use this identifier to cite or link to this item:
https://open.uns.ac.rs/handle/123456789/14283
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Djuric M. | en |
dc.contributor.author | Tot F. | en |
dc.date.accessioned | 2020-03-03T14:55:37Z | - |
dc.date.available | 2020-03-03T14:55:37Z | - |
dc.date.issued | 1994-08-01 | en |
dc.identifier.issn | 00027812 | en |
dc.identifier.uri | https://open.uns.ac.rs/handle/123456789/14283 | - |
dc.description.abstract | Many ceramic products are coated with frits obtained during the liquid-phase sintering process. The most important characteristics of these frits are dependent on the content of particular oxides in the raw-material mixture. Consequently, the quantities of raw powders have to be determined so that the oxide requirements can be satisfied. There also is a need to decrease production cost. Therefore, the raw-material mixture is regarded as an optimal mixture when it is made of the least expensive raw materials. This problem -- calculation of optimal recipes -- can be solved by a linear programming method. Linear programming was used by the authors to estimate optimal raw-material recipes for a few products taken from practice. It is shown that cost reduction is successfully performed by the linear programming procedure. | en |
dc.relation.ispartof | American Ceramic Society Bulletin | en |
dc.title | Calculation of optimal mixtures for frit production | en |
dc.type | Journal/Magazine Article | en |
dc.identifier.scopus | 2-s2.0-0028481648 | en |
dc.identifier.url | https://api.elsevier.com/content/abstract/scopus_id/0028481648 | en |
dc.relation.lastpage | 117 | en |
dc.relation.firstpage | 114 | en |
dc.relation.issue | 8 | en |
dc.relation.volume | 73 | en |
item.grantfulltext | none | - |
item.fulltext | No Fulltext | - |
Appears in Collections: | Naučne i umetničke publikacije |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.