Fakultet tehničkih nauka, Departman za proizvodno mašinstvo
Organization name
Fakultet tehničkih nauka, Departman za proizvodno mašinstvo
Parent OrgUnit
City
Novi Sad
Country
Serbia
OrgUnit's Researchers publications
(Dept/Workgroup Publication)
Results 1-20 of 35 (Search time: 0.004 seconds).
| Issue Date | Title | Author(s) | |
|---|---|---|---|
| 1 | 1-Dec-2018 | 3D digitization of featureless dental models using close range photogrammetry aided by noise based patterns | Željko Santoši ; Igor Budak ; Mario Šokac ; Tatjana Puškar ; Đorđe Vukelić ; Branka Trifković |
| 2 | 2018 | Applying destination competitiveness model to strategic tourism development of small destinations – The case of South Banat district | Drakulić Kovačević Nataša; Kovačević Lazar ; Stankov Uglješa ; Dragićević Vanja ; Miletić Aleksandar |
| 3 | 1-Oct-2018 | Cold radial extrusion of a gear-like element with flow relief opening | Skakun, Plavka ; Lengyel R.; Baloš, Sebastian ; Movrin, Dejan ; Milutinov, Miodrag |
| 4 | 1-Jan-2018 | Comparison of municipal waste management systems using lca. south backa waste management region. A case study | Stepanov J.; Ubavin, Dejan ; Prokic D.; Budak, Igor ; Stevanovc-Carapina H.; Stanisavljević, Nemanja |
| 5 | 1-Jan-2018 | Computer-aided modeling and additive manufacturing fabrication of patient-specific mandibular implant | Šokac, Mario ; Budak, Igor ; Miljanovic D.; Santoši, Željko ; Vukelić, Đorđe |
| 6 | 1-Jan-2018 | Consistency analysis of mechanical properties of elements produced by FDM additive manufacturing technology | Banjanin, Bojan ; Vladić, Gojko ; Pal, Magdolna ; Baloš, Sebastian ; Dramićanin, Miroslav ; Rackov, Milan; Kneţević I. |
| 7 | 2018 | Definitive screening design for the optimization of flexographic water-based cyan dye removal from aqueous solution by nZVI-induced Fenton process | Kecić V.; Prica Miljana ; Kerkez Djurdja ; Lužanin Ognjan ; Bečelić-Tomin Milena ; Tomašević Pilipović Dragana ; Leovac-Maćerak A. |
| 8 | 20-Jan-2018 | Eco-design of a low-cost adsorbent produced from waste cherry kernels | Vukelić, Đorđe ; Boškov, Novak ; Agarski, Boris ; Radonić, Jelena ; Budak, Igor ; Pap, Ištvan; Turk-Sekulić, Maja |
| 9 | 1-Oct-2018 | The effect of dental LED light-curing unit photoactivation mode on 3D surface morphology of dental nanocomposites evaluated by two-dimensional multifractal detrended fluctuation analysis | Ţălu Ş.; Yadav R.; Lainović, Tijana ; Méndez-Albores A.; Trejo G.; Kukuruzović, Dragan ; Nezafat N.; Shafiekhani A.; Solaymani S. |
| 10 | 1-Jan-2018 | Emissivity of aluminium alloy using infrared thermography technique | Lanc, Zorana ; Štrbac, Branko ; Zeljković, Milan ; Živković, Aleksandar ; Hadžistević, Miodrag |
| 11 | 1-Jan-2018 | Energy aspects of tribological behaviour of nodular cast iron | Kovac P.; Jesic D.; Sovilj-Nikic S.; Kandeva M.; Kalitchin Z.; Gostimirović, Marin ; Savković, Borislav |
| 12 | 1-Aug-2018 | Evaluation of residual stresses after irregular interrupted machining | Malotova S.; Cep R.; Zlamal T.; Mohyla P.; Czán A.; Antić, Aco; Budak, Igor ; Mircea L. |
| 13 | 1-Oct-2018 | Evolutionary multi-objective optimization of energy efficiency in electrical discharge machining | Gostimirović, Marin ; Pucovsky V.; Sekulić, Mirjana; Radovanović, Milan; Madic M. |
| 14 | 1-Jun-2018 | Flexural strength and modulus of autopolimerized poly(Methyl methacrylate) with nanosilica | Baloš, Sebastian ; Pilić, Branka ; Petrović, Đorđe ; Petronijević Šarčev, Branislava |
| 15 | 19-Jan-2018 | Generation of a layer of severe plastic deformation near friction surfaces in upsetting of steel specimens | Alexandrov S.; Šidjanin L.; Vilotić, Dragana; Movrin, Dejan ; Lang L. |
| 16 | 15-Dec-2018 | Improved coloristic properties and high NIR reflectance of environment-friendly yellow pigments based on bismuth vanadate | Dolić S.; Jovanović, Đorđe; Štrbac, Dragana ; Far L.; Dramićanin, Miroslav |
| 17 | 1-Apr-2018 | Increasing stiffness of constructions through application of enhancing elements | Tadic B.; Matejic M.; Simunovic G.; Kljajin M.; Kocovic V.; Bogdanovic B.; Vukelić, Đorđe |
| 18 | 1-May-2018 | Industrial evaluation of duplex PVD hard coatings for HPDC | Kovačević, Lazar ; Terek, Pal ; Miletić, Aleksandar; Kukuruzović, Dragan ; Škorić, Branko ; Panjan P. |
| 19 | 1-Jan-2018 | Influence of restorative procedures on endodontically treated premolars: Finite element analysis of a CT-scan based three-dimensional model | Tatjana Maravić ; Darko Vasiljević; Ivana Kantardžić ; Tijana Lainović ; Ognjan Lužanin ; Larisa Blažić |
| 20 | 1-Oct-2018 | Influence of the restorative procedure factors on stress values in premolar with MOD cavity: a finite element study | Ivana Kantardžić ; Darko Vasiljević; Ognjan Lužanin ; Tatjana Maravić ; Larisa Blažić |