Прегледање према Департман Fakultet tehničkih nauka, Departman za proizvodno mašinstvo
Приказивање резултата 158 do 177 od 376
< претходна
следећа >
Датум издавања | Наслов | Аутор(и) |
---|---|---|
13-феб-2014 | Hand gesture recognition using low-budget data glove and cluster-trained probabilistic neural network | Lužanin, Ognjan ; Plancak M. |
1-дец-2009 | Handling automation of fixture and fixture elements in flexible technological structures | Ostojić, Gordana ; Stankovski, Stevan ; Vukelić, Đorđe |
1993 | Hemijska heterogenost različitih linija šećerne repe | Pajević Slobodanka ; Krstić Borivoj; Kovačev Lazar |
1999 | Hemijske transformacije monosaharida | Popsavin Velimir ; Lajšić Stevan; Vukojević N.; Popsavin Mirjana ; Berić O; Ćetković Gordana ; Dramićanin T. |
10-сеп-2013 | Hydrogen desorption properties of MgH<inf>2</inf> catalysed with NaNH <inf>2</inf> | Milošević, Zoran; Milanović I.; Mamula B.; Crossed D Signukić A.; Rajnović, Dragan ; Pasquini L.; Novaković J. |
2016 | Hydrophobic silica nanoparticles as reinforcing filler for poly (lactic acid) polymer matrix | Pilić, Branka ; Radusin, Tanja; Ristić, Ivan ; Silvestre, Clara; Lazić, Vera ; Baloš, Sebastian ; Duraccio, Donatella |
1-јан-2019 | Impact of contaminated fluid on the working performances of hydraulic directional control valves | Karanović, Velibor ; Jocanović, Mitar ; Baloš, Sebastian ; Knežević, Dejan; Mačužić I. |
1-мар-2012 | The impact of die angle on tool loading in the process of cold extruding steel | Randjelović S.; Manić, Milan ; Trajanović M.; Milutinović M.; Movrin, Dejan |
1-јан-2019 | Impact of processing parameters on tensile strength, in-process crystallinity and mesostructure in FDM-fabricated PLA specimens | Lužanin, Ognjan ; Movrin, Dejan ; Stathopoulos V.; Pandis P.; Radusin Bardić, Nataša ; Guduric V. |
1-мај-2019 | Implementation and signal processing of colorimetric probe | Batinić B.; Bajić, Jovan ; Rajs, Vladimir ; Laković, Nikola ; Kulundžić, Nenad ; Rodić D.; Joža, Ana |
21-нов-2011 | Implementation of automatic identification technology in a process of fixture assembly/disassembly | Ostojić, Gordana ; Stankovski, Stevan ; Vukelić, Đorđe ; Lazarevic M.; Hodolic J.; Tadic B.; Odri, Stevan |
15-дец-2018 | Improved coloristic properties and high NIR reflectance of environment-friendly yellow pigments based on bismuth vanadate | Dolić S.; Jovanović, Đorđe; Štrbac, Dragana ; Far L.; Dramićanin, Miroslav |
1-апр-2019 | Improved ejection test for evaluation of soldering tendency of cast alloy to die core materials | Terek, Pal ; Kovačević, Lazar ; Miletić, Aleksandar; Kukuruzović, Dragan ; Baloš, Sebastian ; Škorić, Branko |
1-јан-2013 | An Improved Experimental Method for Determining the Workability Diagram | Alexandrov S.; Vilotić, Dragana; Konjovic Z.; Vilotić, Marko |
1-јан-1998 | An improved synthesis for obtaining 2-deoxy-2-iodo-D-mannopyranose derivatives | Djurendić E.; Vukojević N.; Dramićanin T. ; Čanadi, Janoš ; Miljković D. |
1-јан-2019 | Improvement of low-temperature characteristics of biodiesel by additivation | Tasić, Ivan ; Tomić, Milan ; Aleksić, Aleksandra ; Đurišić-Mladenović, Nataša ; Martinović, Ferenc; Mićić R. |
1-мај-2013 | Improving mechanical properties of flowable dental composite resin by adding silica nanoparticles | Baloš, Sebastian ; Pilić, Branka ; Petronijević Šarčev, Branislava ; Marković, Dubravka ; Mirković, Siniša ; Šarčev, Ivan |
1-апр-2018 | Increasing stiffness of constructions through application of enhancing elements | Tadic B.; Matejic M.; Simunovic G.; Kljajin M.; Kocovic V.; Bogdanovic B.; Vukelić, Đorđe |
2014 | Indentation size effect in autopolymerized and microwave post treated poly(methyl methacrylate) denture reline resins | Baloš, Sebastian ; Siđanin, Leposava; Pilić, Branka |
1-мај-2018 | Industrial evaluation of duplex PVD hard coatings for HPDC | Kovačević, Lazar ; Terek, Pal ; Miletić, Aleksandar; Kukuruzović, Dragan ; Škorić, Branko ; Panjan P. |